Search found 5 matches

by Rodney
Wed Apr 20, 2011 11:40 am
Forum: Tow Vehicle
Topic: 5th wheel hitch
Replies: 46
Views: 16842

Re: 5th wheel hitch

Thank you everyone for the info. I had the wings of my pin box cut off and had the Rota Flex pin arm dropped down one nut hole which gave me approximately 2 inches lift on the bird and I now clear my bed side while turning 90. However now I have a really rough ride and the bird must bouncing all aro...
by Rodney
Wed Apr 20, 2011 6:30 am
Forum: Tow Vehicle
Topic: 5th wheel hitch
Replies: 46
Views: 16842

Re: 5th wheel hitch

Hi! everyone. Thanks for all the great info. I had the wings cut off my pin box and had the pin arm (rota flex) dropped down to the next bolt hole which gave me approximately two inches lift on the bird. However, dropping the pin arm gave the bird such a shake rattle and roll in the rear and rough r...
by Rodney
Sat Apr 09, 2011 8:00 am
Forum: Tow Vehicle
Topic: 5th wheel hitch
Replies: 46
Views: 16842

Re: 5th wheel hitch

Thank you to everyone. Your input were very helpful. I have an appointment with a rv repair shop to lower my pin box to the max so it will level my nose down and I will also have them cut off the wings on the box so I don't have anymore problems. once again THANK YOU.
by Rodney
Thu Apr 07, 2011 10:28 pm
Forum: Tow Vehicle
Topic: 5th wheel hitch
Replies: 46
Views: 16842

Re: 5th wheel hitch

Thank you for your info. I have a 2001 F350 and have 6 inches clearance from top of rail to bottom of trailer. I also a slight nose down so a lift of 2 or 3 inches won't throw the level off by much. As far the truck blocks I don't really know what you're referring to. Any info is helpful. Thanks again
by Rodney
Thu Apr 07, 2011 6:42 am
Forum: Tow Vehicle
Topic: 5th wheel hitch
Replies: 46
Views: 16842

5th wheel hitch

Just purchased a new cardinal 3625 and having problem with present hitch, RBW 16k max hight 15", installed in my F350. Back corner of pin box hits the top of my bed when making 90 turn. Would a new hitch with a max hight of 18" help. If so can any one recommend a what make would be best? W...