Bed Rail Clearance

RevHam · Post by **RevHam** » Mon Jun 18, 2007 8:02 am

I just purchased a new TV - 2007 Chevy 3500 in the new body style.
I was curious if anyone out there with the new style chevy has had any problems with bed rail clearance with their 5er. The new styles sit higher and have deeper beds. I will be towing my 2006 Cardinal 30WB.
I go in the morning to have the hitch installed - head out Wednesday for vacation. Gettin' a little nervous about it.
Thanks in advance!

Post by **Don Wilson** » Mon Jun 18, 2007 8:36 am

When they install the hitch they will adjust the height to clear your bed rails. They may also have to adjust your pinbox.

Don

campswithcritters · Post by **campswithcritters** » Mon Jun 18, 2007 9:33 am

Don's got it there, most recommend 6 inch minimum, personally I prefer 7 inch as I dented a rear corner on my 05 Dodge (which had 5 1/2 inch) in a very unlevel camp ground in New Mexico.

RevHam · Post by **RevHam** » Mon Jun 18, 2007 10:04 am

Don Wilson wrote:When they install the hitch they will adjust the height to clear your bed rails. They may also have to adjust your pinbox.

Don

I assumed so but with us heading out Wednesday, I was gettin' a little skittish.

Thanks to everyone!

Post by **Don Wilson** » Mon Jun 18, 2007 4:50 pm

Revham,
I see you have a new 2007 Chevy. They recommend that you have 500 miles on it before you start towing with it. It gives it some breakin time before putting weight and towing.

Don

RevHam · Post by **RevHam** » Tue Jun 19, 2007 9:15 am

Don Wilson wrote:Revham,
I see you have a new 2007 Chevy. They recommend that you have 500 miles on it before you start towing with it. It gives it some breakin time before putting weight and towing.

Don

Thanks, Don. I put some mileage on it over the weekend by taking my father-in-law out to eat at Sonny's. The trip took me from SW Ohio to just south of Lexington, KY. It was about a 300 mile round trip. When I pulled into the RV dealership to have the hitch put in this morning, the odometer read 499!

RevHam · Post by **RevHam** » Tue Jun 19, 2007 1:05 pm

RevHam wrote:
Don Wilson wrote:When they install the hitch they will adjust the height to clear your bed rails. They may also have to adjust your pinbox.

Don
I assumed so but with us heading out Wednesday, I was gettin' a little skittish.

Thanks to everyone!

Ok - hitch is in, 5er is on, it looks like clearance is fine. It has 6-7 in clearance. The 5er does appear to have it's nose slightly higher, though.
We will see how things go when my wife and I head out in the morning.
Thanks to everyone!

Rob & Cathy · Post by **Rob & Cathy** » Tue Jun 19, 2007 2:07 pm

RevHam wrote: Ok - hitch is in, 5er is on, it looks like clearance is fine. It has 6-7 in clearance. We will see how things go when my wife and I head out in the morning.

It sounds like fun times are coming up. Enjoy the new truck and 5er and let us know how things are going.

Rob

Cardinal RV Club

Bed Rail Clearance

Bed Rail Clearance

Bed Rail

Re: Bed Rail

Re: Bed Rail

Re: Bed Rail