Page 1 of 1

Toilet Paper Holder

Posted: Sat Jul 08, 2006 9:03 am
by Don Wilson
We have been trying to find a tp holder since we bought our Cardinal, Jan 2005, without any success.
We have looked at the 05,06 and 07 Cardinals and Forest River still has not figured out a way to put on a toilet paper holder.

What have you ingenious :idea: Cardinal owners come up with???

Posted: Sat Jul 08, 2006 9:51 am
by Luizianna
We use a stand that we got from Bed, Bath and Beyond. Holds 3 rolls and I didn't have to put holes in my wall.

Posted: Sat Jul 08, 2006 10:58 am
by bbgun
We had a magazine rack next to our toilet dh moved it over a few inches and placed the tp holder there works great.

Posted: Sat Jul 08, 2006 4:58 pm
by woodlandrjs
We mounted a holder on the inside of the sink cabinet door then cut a slot in the upper part of the door for the TP to thread through.
Bob and Linda :):)

Posted: Sun Jul 09, 2006 8:25 am
by RV4Gene
I bought a stand, too.......at Wally World for 9.99. Matches the other bath fixtures and works perfectly.

Posted: Sun Jul 09, 2006 11:57 am
by Future Fulltimers
RV4Gene wrote:I bought a stand, too.......at Wally World for 9.99. Matches the other bath fixtures and works perfectly.
DITTO! :lol: :thumbrt:

Posted: Sun Jul 09, 2006 3:21 pm
by Mike Clay
We use a wood table type paper towel holder. Duel rolls :lol:

Posted: Fri Jul 14, 2006 10:29 am
by david_iona
We have an '05 29RKLE and I cut a hole in the wall between the commode room and the area under the bathroom/bedroom sink cabinet.
The wall has enough space to mount a flush "in the wall" toilet tissue holder and does not protrude into the area under the sink cabinet.
The panel wall is easy to cut and the wall space allows placing the hole/tissue holder at any level and wall position you prefer.

Posted: Fri Jul 14, 2006 8:03 pm
by k151487
Ours came with a holder but it wasn't mounted. It matches the faucets and is the standard home kind. I mounted it on the outside wall of the toilet room. Just use plastic expansion mounts and squirt some gorilla glue in before screwing the holder on. It wont budge.

I also bought a matching towel holder (18") from Home Depot and mounted it on the inside of the washer/dryer closet door using the same method.

Gary
Cardinal 33TS-LX

Posted: Mon Jul 17, 2006 3:52 am
by TwoPiggs
k151487 wrote:Ours came with a holder but it wasn't mounted. It matches the faucets and is the standard home kind. I mounted it on the outside wall of the toilet room. Just use plastic expansion mounts and squirt some gorilla glue in before screwing the holder on. It wont budge.

I also bought a matching towel holder (18") from Home Depot and mounted it on the inside of the washer/dryer closet door using the same method.

Gary
Cardinal 33TS-LX
We did almost the same, except the towel holder is mounted to the forward wall in the toilet room (gives you a place to rest your head... :lol: )

Posted: Mon Jul 17, 2006 6:06 am
by Mike Clay
TwoPiggs wrote:
k151487 wrote:Ours came with a holder but it wasn't mounted. It matches the faucets and is the standard home kind. I mounted it on the outside wall of the toilet room. Just use plastic expansion mounts and squirt some gorilla glue in before screwing the holder on. It wont budge.

I also bought a matching towel holder (18") from Home Depot and mounted it on the inside of the washer/dryer closet door using the same method.

Gary
Cardinal 33TS-LX
We did almost the same, except the towel holder is mounted to the forward wall in the toilet room (gives you a place to rest your head... :lol: )
LOL :lol:

Toilet paper holder

Posted: Tue Aug 15, 2006 6:50 am
by Don Wilson
Thanks to all for their replies. We bought a stand that would hold three rolls of TP, but put a plastic tube on the bottom of the stand so it only held two rolls. Didn't want that the third roll to drag on the floor. Only wanted it touching the right bottoms! It worked great on our 18 day trip to New Mexico.