Front Hydraulic Jacks too low?

Discuss with others about towing. What is the best tow vehicle, hitches, brake controllers, etc, keeping in mind that everybody has his/her favorite.

Moderator: Mike Clay

Front Hydraulic Jacks too low?

Postby LeeG » Mon Sep 11, 2017 2:11 pm

We just purchased a 2018 Cardinal 3456. When hooking up to tow it home, we noticed the front jacks had only 6 to 8 inches clearance to the ground. We realize we will have to lower the pin box and purchase a hitch that can be raised as high as possible. Tow vehicle is a awesome old 2002 F350 DRW Chipped Turbo Diesel. It has been towing a heavy Holiday Presidential for over 10 years and no problems. We are unsure about what is the best way to get the truck and fifth wheel level. How much can the Mor Ryde pin box be safely moved and can the Lippert jacks be shortened to their first hole? If anyone has any recommendations, we would appreciate any tips. Thanks!
Posts: 2
Joined: Sun Sep 10, 2017 2:06 pm
Location: Texas

Re: Front Hydraulic Jacks too low?

Postby jtaylor1920 » Mon Sep 11, 2017 7:16 pm

Welcome to the best RV Club around. When I had some questions about moving my hitch I ended up calling Lipper directly for advice. Here is their customer service number - +1-574-537-8900.

Let us know what they say.
John, Laurie & the 2 Schnauzers (Mazie & Obi)
2016 GMC 3500HD Dually D-Max Denali 4x4 (BAT)
2013 Cardinal 3030RS
Nights Camped: 2017 - 22
Rallies Attended - 5
User avatar
Council, Region Leader
Posts: 863
Joined: Sat Aug 18, 2012 9:33 pm
Location: Oregon Hillsboro

Re: Front Hydraulic Jacks too low?

Postby LeeG » Tue Sep 12, 2017 4:01 am

Thank You! I will give them a call. We can't wait to get our new Bird home!

Posts: 2
Joined: Sun Sep 10, 2017 2:06 pm
Location: Texas

Re: Front Hydraulic Jacks too low?

Postby Olbird » Wed Sep 13, 2017 6:48 pm

You have two starting points, one is trailer should be level with while allowing for minimum clearance between top of truck bed rails and bottom of 5th wheel, if the clearance is not correct at that point trailer will never be level while towing during.

Basically what I am saying is you can lower or raise pin box, or lower or raise bed hitch any way you want but if the Bed Rail to bottom of 5th wheel is below minimum clearance The truck needs lowering or the 5th wheel need raising.

You should always have the same amount of bolts in pin box as send by factory when moving pin box in other holes
George & Julie
2014 3850 RL Full Paint w/ TrailAir Spring Ride System, Kodiak Disc Brakes, TrailAir Tri-Glide Pin Box, Over 130 Mods

GMC 3500 Denali DRW
User avatar
Council, Asst. Admin
Posts: 3990
Joined: Fri Mar 10, 2006 9:29 pm
Location: Washington Kelso

Return to Towing Discussions

Who is online

Users browsing this forum: No registered users and 1 guest